Quaker Houghton

ET ‘20
2020-05-19 - 2020-05-21 | Hyatt Regency Orlando, 9801 International Dr, Orlando, FL, 32819, United States
The marketplace and information center where aluminum extrusion industry suppliers connect directly with decision makers. It’s more than a trade show – it’s an extension of the learning experience at ET where you can hear about the latest innovations from top suppliers in the industry.

FABTECH – Mexico City
2020-05-12 - 2020-05-14 | Centro Citibanamex, Mexico City, Mexico
FABTECH Mexico is the leading manufacturing event in Latin America for metal forming, fabricating, welding and finishing industries.

OTC 2020
2020-05-04 - 2020-05-07 | NRG Center, 1 NRG Park, Houston, TX, 77054, United States
The Offshore Technology Conference (OTC) showcases leading-edge technology for offshore drilling, exploration, production, and environmental protection. OTC is the world’s foremost event for the development of offshore resources. The conference attracts attendees and exhibiting companies from around the globe.

CONAC – Congress and exhibition
2020-03-23 - 2020-03-25 | Cintermex, Monterrey, Nuevo León
CONAC is a Steel industry conference and exposition produced by the Mexican Chapter of AIST. This bi-annual event includes lectures and exhibits. The tradeshow features conferences divided into four categories: Steelworks, Rolling, Maintenance and Safety, 4.0 Industry, Steel Processes and Applications. Additionally, the exhibitions include some of the most important steel production and supply companies in the Latin American Steel industry.

Technishow Utrecht
2020-03-17 - 2020-03-20 | Jaarbeurs, Jaarbeursplein, 3521 AL, Utrecht, Netherlands
The largest and most complete trade fair in the Benelux will take place again in Jaarbeurs Utrecht.

CONEXPO-CON/AGG
2020-03-10 - 2020-03-14 | Las Vegas Convention Center, 3150 Paradise Rd, Las Vegas, NV, 89109, United States
Quaker Houghton will be exhibiting at CONEXPO-CON/AGG

Mining companies today face challenges as never before. Under increasing pressures to create a safe work environment, and lower environmental impact, while also reducing costs, mining operations must be more efficient than ever. At this critical point in time, we are the long-term partner for mining companies seeking to anticipate – and overcome – these challenges. Our highest commitment is to offer solutions that meet the real demands of a complex industry. Whatever comes next.
QUINTOLUBRIC® 888For those who won’t compromise on efficiency and safety, there’s Quaker’s QUINTOLUBRIC® line of fire-resistant hydraulic fluids. Our solutions keep your machines working at optimal performance with fewer interruptions and a longer life span for a lower total cost of ownership, increased safety and reduced risk.
» Global formulation
» Excellent shear stability
» Best-in-class fluid life
» Reduced environmental impact
» Factory Mutual Approved
DUSTGRIP®Dust suppression is a continuous and costly activity in many industries; it impacts operational efficiency, impairs visibility, increasing accident risk and has detrimental effects on workers’ health and the work environment. Quaker’s DUSTGRIP® dust suppressants offer solutions for these challenges, and our team of experts, application engineers, and chemists can customize an application to meet any dust challenges you face.
MINETECH™Our line of MINETECH™ ground control agents are able to penetrate into small fissures, due to their low viscosity and high flexibility. They provide excellent adhesion, chemical resistance and durability, additionally, because their full mechanical strength is achieved quickly there is minimal disruption to an operation during installation.
Our line of MINETECH™ ground control agents can be used for:

Ground consolidation and stabilization, in the event of fractured and unstable ground
Sealing against water ingress
Injection of rock bolts
Concrete and earthen dams
Storm water systems, tunnels, manholes, and underground vaults

Heat Treat Mexico: Advanced Thermal Processing Technology Conference and Expo
2020-03-03 - 2020-03-05 | Grand Fiesta Americana Querétaro, Querétaro, Querétaro
This conference and Expo is organized by the ASM Heat Treating Society. The objective is attract Maintenance Supervisors, Metallurgists and Production Engineering Staff and will present relevant new technology for thermal processing and how it is applied to the production environment in Mexico.

Euroguss 2020
2020-01-14 - 2020-01-16 | Exhibition Centre Nuremberg, Messezentrum 1, Nürnberg, 90471, Germany
The international die casting industry meets at Europe’s biggest trade fair for die casting for the 13th time. The product range shows innovative solutions for die casting processes like aluminium die casting, magnesium die casting or zinc die casting. The event also focuses on topics like rapid prototyping, die casting machinery and material testing.

Save the Date: Quaker Houghton Investor Day
2019-12-11 | New York Stock Exchange, Siebert Hall, 11 Wall St,, New York, 10005, United States
New York Stock Exchange
Siebert Hall,
New York, NY

Aalener Barbara Kolloquium (Die Casting)
2019-12-01

MetalMadrid
2019-11-27 - 2019-11-28 | Feria de Madrid, Av. Partenón Nº 5, Madrid, 28042, Spain
MetalMadrid is the leading annual industrial show tailored to meet the needs of today’s advanced manufacturers and suppliers. Don’t miss this opportunity to meet, learn and network with a line up of more than 600 leading suppliers across 2 days.

Aerospace & Defence Meetings Torino
2019-11-26 - 2019-11-27 | Oval Lingotto, Via Giacomo Matté Trucco, 70, Torino, 10126, Italy
Aerospace & Defense Meetings is the only international business convention for the aerospace and defense industry organized in Italy, tailored to your needs. In 2 days, all participating companies have the chance of meeting and build up targeted business relations and develop new projects with companies from all over the world. For key players and primes A&DM Torino is a unique occasion to optimize research into new suppliers innovations and products.

KSS Forum – Conference MW 2019
2019-11-26 - 2019-11-27
Industrial application, performance and maintenance of coolant systems as the key technology in metal cutting are the focus of the KühlSchmierStoff-Forum in Fellbach, Germany.

Adipec
2019-11-11 - 2019-11-14 | Abu Dhabi National Exhibition Centre, Khaleej Al Arabi Street (Also known as Coast Road or 30th Street), Abu Dhabi, United Arab Emirates
One of the most influential exhibitions and conferences in the oil & gas industry

FABTECH
2019-11-11 - 2019-11-14 | McCormick Place, Chicago, Illinois
Finishing Booth #B15077 | Tube & Pipe Booth #D46448Request A MeetingOur Surface Finishing products assist with cleaning and removing a wide variety of soils; applying conversion coatings to promote paint adhesion and corrosion resistance; and stripping paint, carbon, and rust from substrates being remanufactured. Learn more: surface finishing brochureFeatured Speaker: Joseph Smith - Surface Finishing Business Development Manager
Joe is the Surface Finishing Specialist for Quaker Houghton’s Surface Finishing division. He specializes in paint pre-treatment and specialty cleaning chemistry and processes. Joe holds a BS in Chemistry from Illinois State University.
A common problem facing manufacturers using metal and surfacing finishing conversion coating processes is the need to consider the expense and effluent discharge liabilities of the process water. A proven approach combining innovative chemistry with related equipment to allow users to eliminate all process water discharge from their spray washers. This process has enabled users to eliminate waste water permitting, notice of effluent violations, and all related costs associated with excessive water usage. The process integrates high quality performance, simplicity of operation, and minimal operational cost. Two case studies including both powder paint and e-coat applications will be discussed.
HOUGHTO-PREP® ZP TECHNOLOGY – ZIRCONIUM BASED CONVERSION COATING

Low to zero energy requirements
Low environmental impact meaning low sludging and extremely long bath life
Organic content that is 100% biodegradable
Low water usage requirements
Operational efficiency with single package cleaner-coater technology
Quality improvement to eliminate poor salt spray performance and achieve optimum paint adhesion

We are the only chemical specialty supplier to the Tube and Pipe industry to offer system-wide expertise, as well as a comprehensive “Front-to-Back” portfolio of processing fluids and coatings. Our global team of experts provides process expertise and custom-formulated process fluids and coatings for all production operations in welded and seamless tubular mills worldwide. Learn more: QUAKERCOAT® PROTECTIVE COATINGS FOR TUBE & PIPE APPLICATIONS

For use in exterior and interior pipe
Coating technologies: Water based, Solvent based, UV based, hybrid
Corrosion protection
Zero to low VOC solvent based coatings

VERSATILITY WITH THE QUAKERCOOL® 700 TP SERIES COOLANTS

Tube and pipe coolant series platform based on a single product technology
Can be used across multiple operations, substrates, and markets
Targets the hydrotesting, roll forming process, and thread cutting operations
Depending on the process needs, each product in the series demonstrates its flexibility to be used for one or all the targeted applications
Synthetic microemulsion metalworking fluids resistant to microbiological growth
Does not contain chlorinated compounds, formaldehyde release agents, boron, MEA, nor secondary amines
Designed with "front-to-back" compatibility meaning that the QUAKERCOOL® 700 TP series integrates well with upstream chemistries and downstream coatings
QUAKERDRAW® FORMING FLUIDS

Range of metal forming lubricants consisting of emulsifiables, neat oils, and solution synthetic fluids
Superior lubrication with excellent corrosion protection
High film strength additives to reduce scratching and galling on parts and dies
Easy to clean with solvent or alkaline cleaners
Compatibility with typical waste water treatment processes
Versatility in applications for light, medium, or heavy forming; roll forming; cold heading; and hydroforming
Available with a chlorine-free option - reformulated fluids offering heavy duty performance without chlorine content

FMB 2019 – The Supplier Show for Mechanical Engineering
2019-11-06 - 2019-11-08
FMB brings manufacturers, designers and purchasers purposefully together and presents the entire spectrum of the supply industry for machinery and plant construction, including the corresponding services, amongst which market leaders in the field of drive technology, control technology and assembly and handling technology.

Asia Cantech conference
2019-10-28 - 2019-10-30 | Royal Orchid Sheraton Hotel & Towers, Royal Orchid Sheraton Hotel & Towers 2 Chareon Krung Soi 30, Bankok, 10500, Thailand
Asia CanTech is the technical conference and exhibition for can makers and fillers in the Asia-Pacific Region and their suppliers.

KSS Forum Stuttgart-Fellbach
2019-10-26 - 2019-10-27 | Schwabenlandhalle, Fellbach, Schwabenlandhalle Guntram-Palm-Platz 1, Fellbach, 70734, Germany
German metalworking conference. Quaker Houghton has a booth and will sponsor the lanyards. One of our PMs (Ronald Knecht) will also give a presentation with an opportunity for follow-up discussion.

AIST European Steel Forum
2019-10-23 - 2019-10-25 | Falkensteiner Hotel, Leoben; University of Leoben, Falkensteiner Hotel In der Au 1, Leoben, AT-8700, Austria
This program will emphasize candid conversation on the practical solutions and economic drivers for technology innovation within the European and North American steel industry. The line-up will cover the latest developments in CO2-Free Steelmaking, Alternative Iron Feedstocks, Enhanced Safety with Robotics and Innovations in Plant Design.
A unique panel of industry leaders from Europe and North America will debate the key issues and opportunities for creating a sustainable steel industry. We’ll also discuss student perceptions of the steel industry and recruitment strategies as we aim to secure our steel workforce of tomorrow.

6th Aachener Kühlschmierstoff-Tagung
2019-10-23 - 2019-10-24 | RWTH Aachen, Manfred-Weck-Haus, Steinbachstr. 19, Aachen, 52074, Germany
German metalworking conference.

6th Aachener Kühlschmierstoff-Tagung
2019-10-23 - 2019-10-24
The WZL machine tool laboratory at RWTH Aachen University conducts fundamental research and consulting projects geared to the needs of the industry and thus develops innovative, practice-oriented solutions for securing successful corporate development.

SIANE Toulouse aerospace
2019-10-22 - 2019-10-24 | Parc des expositions de Toulouse, Rond-Point Michel Bénech, Toulouse, France
Machinery tools and production equipment conference

Parts2Clean 2019
2019-10-22 - 2019-10-24 | Stuttgart Messe, Exhibition Grounds Stuttgart Hall 7 und 9, Stuttgart, 70629, Germany
Parts2clean is the leading international trade fair for industrial parts and surface cleaning, which takes place once a year in Stuttgart. National and international exhibitors show the latest innovations, products and technologies in the areas of cleaning, maintenance, recycling and disposal and offer practical and user-specific solutions.

Transvalor International Simulation Days
2019-10-15 - 2019-10-17 | Beachcomber French Riviera Resort & Spa, 3550 Route des Dolines, Biot, 06410, France
Three days of conference talks and exhibits allow you to be thoroughly informed about the latest innovations, new services and technologies for the design and manufacturing of your products. The second edition of this major event for the industrial and academic worlds interested in the simulation of material forming processes.

Seco Tools UK
2019-10-09 - 2019-10-10
Seco is one of the world’s largest providers of comprehensive metal cutting solutions for milling, stationary tools, holemaking and tooling systems.
Contact UsSign Up for Seco

MSV (with distributor Lubstar)
2019-10-07 - 2019-10-11 | Brno Exhibition Centre, Výstaviště 405/1, Brno-střed, 603 00, Czech Republic
The MSV International Engineering Fair is the most important industrial fair in Central Europe, with more than 1,600 exhibitors and 80,000 visitors participating every year. Over 50% of exhibitors and 10% of visitors come from abroad.

NADCA 2019
2019-10-01 - 2019-10-03
Quaker is recognized as the technical leader in the die cast lubricant field. Our innovative solutions provide the key to die casting lubricant performance.

Canadian Manufacturing Technology Show (CMTS)
2019-09-30 - 2019-10-03
For more than 30 years, the CMTS audience from within Canada’s leading industries including automotive and aerospace have come together to source solutions and knowledge from the global leaders in machine tools and tooling, metalworking, and advanced manufacturing. (Hall 4 booth 4121 )

Cold Rolling Day
2019-09-25 - 2019-09-26

EMO Hannover 2019
2019-09-16 - 2019-09-21
Exhibitors travel to EMO Hannover from all over the world and from all sectors of metalworking technology. With a share of foreign exhibitors running at approximately 60%, EMO Hannover is the world’s most international metalworking trade fair. Visit Hall 6, Stand H07
