27 Feb

Aerospace Titanium Machining : 25% Increase in Tool Life

2020-03-16T06:07:21-04:00

Trials were initially set up for three products: a local boron amine technology coolant, a leading aerospace competitor coolant and HOCUT® 3450. The latter two products were both high ester EP type products with a very high level of lubricity. A total of 6 milling tools were monitored for tool change frequency during the period of the trial.

Aerospace Titanium Machining : 25% Increase in Tool Life2020-03-16T06:07:21-04:00
27 Feb

Aerospace Components Machining : Reduced Cycle Time and Tooling Costs at UK Ejector Seat Manufacturer

2020-03-16T06:07:58-04:00

HOCUT® 795 B was proposed for machining trials supported by independent performance data on similar operations from other aerospace component manufacturers. HOCUT® 795 B has consistently shown itself to be the best in class coolant for aerospace alloys.

Aerospace Components Machining : Reduced Cycle Time and Tooling Costs at UK Ejector Seat Manufacturer2020-03-16T06:07:58-04:00
27 Feb

Aerospace Titanium Machining : 60% Cost Decrease Of Fluids And Elimination Of Foam

2020-03-16T06:29:25-04:00

Quaker Houghton proposed HOCUT® 795 B, dedicated to Aerospace parts machining and well established for its long sump life and good stability. The customer began a trial with HOCUT® 795 B on a Mega 5 (MAG) milling tool machine. After 2 years HOCUT® 795 B was still in use, and there has been no sump clean-out and no anti-foam nor bactericide addition.

Aerospace Titanium Machining : 60% Cost Decrease Of Fluids And Elimination Of Foam2020-03-16T06:29:25-04:00
22 Feb

Aerospace Titanium Machining : 150% Increase in Tool Life

2020-03-16T06:58:33-04:00

The company needed to make improvements in their machining oper¬ations. They were losing an average of one hour of productivity for each roughing cycle (4 hours lost machining time/ 24 hours). There were also issues with corrosion on machine tool beds with seals and coatings breaking down.

Aerospace Titanium Machining : 150% Increase in Tool Life2020-03-16T06:58:33-04:00